Ricoh SP C440dn, Field Service Manual, Page: 42 / 654

5. Adjust the paper guides to close any gaps.
• Do not move paper loaded in the tray more than a few millimeters. Excessive movement of
loaded paper can cause edges of sheets to snag on the openings of the tray's lifting plate,
resulting in sheets being folded or becoming jammed.
• When adjusting the paper width, use the right side guide only, with the green clip. Do not
hold the left side guide at this time, or skew will occur.
6. Lift the front of the paper tray, and slowly slide the paper tray back until it stops. Make
sure that the paper tray is fully inserted to prevent paper jams.
Turning Power On
• Turn off the power switch whenever you plug in and unplug the power cord.
2. Installation
40