Ricoh SP C440dn, Field Service Manual, Page: 448 / 654

5-816-201 Instl:Condition CTL [0 to 4 / 0 / 1/step]
Displays a number that indicates the status of the @Remote service device.
0: Neither the registered device by the external nor embedded RCG device is set.
1: The embedded RCG device is being set. Only Box registration is completed. In this
status, this unit cannot answer a polling request from the external RCG.
2. The embedded RCG device is set. In this status, the external RCG unit cannot
answer a polling request.
3. The registered device by the external RCG is being set. In this status the embedded
RCG device cannot be set.
4 The registered module by the external RCG has not started.
5-816-202 Instl:ID# *CTL [- / - / -]
Allows entering the number of the request needed for the RCG-N device.
5-816-203 Instl:Reference CTL [- / - / -]
[Execute]
Executes the inquiry request to the @Remote GW URL.
5-816-204 Instl:Ref Rslt CTL [0 to 255 / 0 / 1/step]
Displays a number that indicates the result of the inquiry executed with SP5816 203.
3: Proxy error (proxy enabled)
4: Proxy error (proxy disabled)
5: Proxy error (Illegal user name or
password)
6: Communication error
8: Other error
9: Inquiry executing
11: Registration number error
(already registered number)
12: Registration number error
(parameter error) 20: Dial-up failure (modem type only)
21: Ansewer tone detection failure (modem
type only)
22: Carrier detection failure (modem type
only)
23: Modem setting parameter error (modem
type only)
24: Power supply error (modem type only)
25: Modem line disconnected (modem type
only)
26: Busy line (modem type only)
5-816-205 Instl:Ref Section CTL [- / - / -]
Displays the result of the notification sent to the device from the GW URL in answer to
the inquiry request. Displayed only when the result is registered at the GW URL.
5. System Maintenance Reference
446