Ricoh SP 230SFNw, Service Manual

Page: 66 / 255

2-45
Confidential

Error code 8A01
The registration rear sensor detected that the paper fed was smaller or larger than the
specified size in duplex printing mode.
<User Check>
• Use appropriate paper (Letter to Legal).
 Error code 8C00
There is no paper set in the manual feed slot on the manual feed slot printing.
<User Check>
• Set the paper in the manual feed slot.

Error code 8E01
Paper size is not set as A4/Letter/Legal/Folio when printing a list or report.
Error code 8E02
Detected that the size of paper set in the paper tray was over 10 mm shorter than paper size
set in the machine during faxing or printing a list or report.
<User Check>
• Set A4 or Letter-size paper.
Step Cause Remedy
1
Registration rear actuator caught
in some sections of the machine Reattach the registration rear actuator.
2 Registration rear sensor failure Replace the actuator holder ASSY.
3 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1
Registration front actuator caught
in some sections of the machine Reattach the registration front actuator.
2
Connection failure of the
registration front/rear sensor
PCB harness Reconnect the registration front/rear
sensor PCB harness.
3 Registration front sensor failure Replace the actuator holder ASSY.
4 Main PCB failure Replace the main PCB ASSY.
Step Cause Remedy
1
Registration rear actuator caught
in some sections of the machine Reattach the registration rear actuator.
2 Registration rear sensor failure Replace the actuator holder ASSY.
3 Main PCB failure Replace the main PCB ASSY.