manualshive.com logo in svg

Ricoh PRO C9100, Operating Instructions Manual, Page: 52 / 236

Share
Download
Ricoh PRO C9100 Operating Instructions Manual Download Page 52

Limiting Available Functions

To prevent unauthorized operations, you can specify who is allowed to access each of the machine's
functions.
Specify the functions available to registered users. By configuring this setting, you can limit the functions
available to users.
You can place limitations on the use of the printer, browser functions and extended features.

1.

Log in as the user administrator from the control panel.

2.

Press [Address Book Mangmnt].

3.

Select the user.

4.

Press [Auth. Info].

5.

In "Printer" and "Other Functions", select which of the machine's functions you want to
permit.

"Printer" is displayed if user code authentication is being applied for user authentication. For details
about specifying user code authentication, see page 27 "User Code Authentication".

6.

Press [OK].

7.

Log out.

3. Restricting Machine Usage

50

Summary of Contents for PRO C9100













































































































































































































































Reviews:

No comments