Ricoh pro c901, Technical Bulletin

Page: 30 / 586

T
echnical
B
ulletin
PAGE: 1/1
Model:
Aries-P1.5/C1.5
Date:
19-Jan-11
No.:
RM077014
Subject:
Apply auxiliary tray for SR5020
Prepared by:
H. Matsui
From:
PPBG Service Planning Dept.
Classification: Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2
Information in this RTB applies only to the NA market.
General
When the Booklet Finisher (SR5020) is in use with ProC901/C901s, coated thin paper fed out to
the finisher shift tray could result in poor stacking or jam.
Reason : High friction between the shift tray and coated thin paper
Solution : Attach the following auxiliary part to the finisher shift tray.
Part Number Description
D4349901 MODIFICATION :Tray: Auxiliary : Stack
Please note that the Booklet Finisher registered with S/N V5301200075 or newer includes this
auxiliary tray as an accessory.
The auxiliary tray should be used in the following conditions:
S/N of the Booklet Finisher is V5301200075 or older
Booklet Finisher is connected to Pro C901/C901s
Paper type is “Coated & Thin”
Poor stacking on the shift tray
Attaching the Auxiliary Tray:
1. Press the “Stop” button on the Booklet Finisher.
2. If any, remove paper from the shift tray.
3. Pull out the extension tray.
4. Align the projection on the auxiliary tray with the back fence.
5. Press the “Stop” button to resume printing.