Ricoh pro c901, Technical Bulletin

Page: 154 / 586

T
echnical
B
ulletin
PAGE: 2/39
Model:
Aries-P1.5/C1.5
Date:
15-Jun-11
No.:
RM077037
Please place an order for the following modification kit and modify the High Capacity Stacker on
your next service visit for existing sites. The same procedure muat be done also for new site
installations.
D4479903: MODIFICATION KIT: STACKER
Modification Kit Components
Rework No. Part Number Description QTY
A-1 D4477578 SHEET:SHIFT TRAY:INNER BACK 1
A-2 D4477579 SHEET:SHIFT TRAY:MIDDLE 1
Shift Tray Jams
(Modification A)
A-3 D4477581 SHEET:SHIFT TRAY:FRONT 1
B-1 D4342474 ROLLER:EXIT ROLLER:SHIFT 2
B-2 D4472877 SHAFT:EXIT ROLLER:SHIFT 1
B-3 06330120G PARALLEL PIN - 3X12 2
B-4 07200060E RETAINING RING - M6 2
B-5 D4472852 END FENCE:SHIFT:ASS'Y 1
B-6 D4472327 GUIDE PLATE:EXIT:LOWER:ASS'Y 1
B-7 D4472326A FILM:GUARD:FAN 1
B-8 D4342459 ROLLER:DRIVEN:RUBBER:50:DIA22 2
B-9 D4472879 SHAFT:SHIFT:DRIVEN
1
Roller Marks –
Exit Roller
(Shift Tray)
(Modification B)
B-10 11050717 CLAMP:JDW-1S 2
B-11 D4472432 ROLLER:EXIT:AUXILIARY:ASS'Y 1
B-12 D4472434 GUIDE PLATE:PROOF TRAY:LEFT UPPER:ASS'Y 1
B-13 D4342576 EXIT ROLLER:PROOF TRAY:ASS'Y 1
B-14 D4472454 GUIDE PLATE:END FENCE:PROOF TRAY 1
B-15 D4342551 EXIT ROLLER:DRIVEN:PROOF TRAY:ASS'Y 2
B-16 AA080237A BUSHING - 4X5X7 4
Roller Marks –
Exit Roller
(Proof Tray)
(Modification B)
B-17 11050717 CLAMP:JDW-1S 1
C-1 D4474121 BRACKET:PROTECT:DRIVE SUB-UNIT 1
C-2 D4474123 BRACKET:AUXILIARY:TIMING PULLEY:ASS'Y 1
C-3 AE030030 BALL BEARING - 8X19X6 3
C-4 07200060E RETAINING RING - M6 1
C-5 04514006N TAPPING SCREW - 4X6 2
C-6 D4474425 BRACKET:PROTECT:SHAFT:LEFT INNER REAR 1
C-7 D4474533A FILM:GUARD:DC BRUSHLESS MOTOR 1
C-8 D4474534 SUPPORTING PLATE:SYNCHRONOUS BELT 1
C-9 04514008N TAPPING SCREW:4X8 2
Gear Slippage
(Modification C)
C-10 D4474318 TENSION SPRING:TENSIONER:RISING TRAY:24N 4