Ricoh PJ X3340 Operating Instructions Manual Download

Page: 37 / 104

Operations while Projecting Images

Adjusting the Volume of the Speaker

• Do not increase the volume unless you are listening while increasing the volume. Also, lower

the volume before turning off the power, because a loud sound may be emitted when the
power is turned on and cause hearing damage.

Press the [Volume] button.

The value bar appears at the bottom of the screen.

Adjust the volume using the [ ] and [ ] buttons.

CUD047

Press the [ ] button to decrease the volume. Press the [ ] button to increase the volume.

• You can also adjust the volume of the speaker from the control panel on the projector.

Enlarging the Image

Enlarges and displays a part of the image. The image can be enlarged in a range of 100 to 200%.
The enlarged image becomes grainy due to the digital processing.

Press the [Magnify] button.

The value bar appears at the bottom of the screen.

Operations while Projecting Images

Summary of Contents for PJ X3340









































































































Search results

Summary of Contents for PJ X3340

Reviews:

Related manuals for PJ X3340

Brands by name

Popular brands

Ricoh PJ X3340, Operating Instructions Manual

Search results

Summary of Contents for PJ X3340

Reviews:

Related manuals for PJ X3340

Brands by name

Popular brands