Ricoh PJ X3340, Operating Instructions Manual

Page: 20 / 104

Operating Multiple Projectors with the Remote Control
You can operate multiple projectors with a single remote control. It is possible to operate a maximum of
four projectors.
You need to specify an ID number to assign to each projector in [Remote Control ID] under [Default
Settings 2] in advance.
1. Press and hold the [ID] button and then press a number button from 1 to 4 for at least
three seconds.
CUD086
The ID number assigned to the remote control is changed to the number you pressed.
2. Operate the projector.
• The remote control cannot operate a projector unless the ID on the remote control is the same as
the controller ID specified in [Default Settings 2].
• The ID number specified in the remote control is effective until a different ID number is specified.
• The ID number in the remote control must be specified again if the batteries are changed.
1. Preparations for Using the Projector
18