Ricoh PJ X3340, Operating Instructions Manual

Page: 24 / 104

CUD094
Using a DVI-to-HDMI cable
To input a DVI signal to the projector, connect a DVI-to-HDMI cable to the HDMI port of the projector
and to the DVI output of a computer. To output audio from the speaker on the projector, connect an
audio cable to the Audio In port of the projector and to the audio output of a computer.
CUC032
• You can use a DVI-to-HDMI conversion adapter instead of a DVI-to-HDMI cable.
Connecting AV Equipment
Use a cable that supports the signal being input when connecting AV equipment.
Using an HDMI cable
Connect an HDMI cable to the HDMI ports of the projector and the AV equipment.
CUD096
• Some devices may not operate properly when connected using HDMI.
• Use only an HDMI cable that has the HDMI logo. To input 1080p image signals, use a high-speed
HDMI cable. A conventional HDMI cable may not work properly.
1. Preparations for Using the Projector
22