Ricoh PJ K7000 User Manual Download Page 74

Page: 74 / 82

Replacing the Lamp

A warning message will be displayed once the lamp has surpassed life expectancy.

At this point, it is recommended to change the lamp as soon as possible. Please

contact the dealer to acquire a lamp.

Type number: RICOH replacement lamp type 13

Warning: If ceiling mounted, please use caution when opening the lamp

access panel. It is recommended to wear safety glasses if changing the

bulb when ceiling mounted. “Caution must be used to prevent any loose

parts from falling out of projector.”

Warning: Lamp compartment is hot! Allow it to cool down before changing

lamp!

Warning: To reduce the risk of personal injury, do not drop the lamp module

or touch the lamp bulb. The bulb may shatter and cause injury if it is

dropped.

Summary of Contents for PJ K7000



















































































Search results

Summary of Contents for PJ K7000

Reviews:

Related manuals for PJ K7000

Brands by name

Popular brands

Ricoh PJ K7000, User Manual

Search results

Summary of Contents for PJ K7000

Reviews:

Related manuals for PJ K7000

Brands by name

Popular brands