Ricoh PJ K7000, User Manual

Page: 13 / 82

13
CAUTION
What to do if a lamp has exploded
If the lamp explodes, remove the power cord from the product, leave the
room while making sure it is thoroughly ventilated.
If the lamp explodes and you think that you have gotten glass particles
or mercury vapor in your eyes or have inhaled either, contact a doctor
immediately.
Clean up the area around the product completely while being careful not
to get injured from any broken glass pieces.
Throw away any food that was near the product.
Ask your service representative to replace the lamp and inspect the
product.
CAUTION
Do not block the projection light when it is on. If you do so, the part that is
blocking the projection light may get quite hot and deform, deteriorate or
cause a burn or fire. The reflected light may make the lens hot and cause a
product failure. To temporarily suspend projection, select the mute function.
To suspend longer, turn off the product.
CAUTION
Be sure to always use a dedicated replacement lamp that is new when
replacing the lamp. If you use a lamp that is not dedicated, it may result in an
explosion and injury.
Moving
This section explains safety precautions about moving the machine.
CAUTION
Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, take care that the power cord is not damaged
under the machine. Failing to take these precautions could result in fire or
electric shock.