64
Reset
Choose “Yes” to return the display parameters on all menus to the factory default
settings.
The following settings will still remain: Phase, H. Size, User, Language, Projector
Position, High Altitude Mode, Security Settings, and Keystone.
OPTIONS | Lamp Settings
Lamp Hours
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning message when the changing
lamp message is displayed.
The message will appear 30 hours before suggested replacement of lamp.
Lamp Mode
Normal: Choose “Normal” to increase the brightness.
`
ECO: Choose “ECO” to dim the projector lamp which will lower power
`
consumption and extend the lamp life.
Advanced: the lamp power can be adjusted in detail.
`
Lamp Reset
Reset the lamp hour counter after replacing the lamp.
Remote code: show the remote code of the projector.
Remote code(Active): show the remote code of the remote control. To use this function, press any key on
the remote. Remote code will be shown.
Summary of Contents for PJ K7000
Page 82: ...Y041 6221 AU EN US EN GB EN...
