Ricoh PJ K7000, User Manual

Page: 29 / 82

29
Powering Off the Projector
1. Press the “Standby” button on the remote control or the “ ” button on the con-
trol panel to turn off the projector
①
. The following message will be displayed on
the screen.
Press the “Standby” button on the remote control or the “ ” button on the
control panel again
①
to confirm otherwise the message will disappear after 15
seconds. When you press for the second time, the projector will shut down.
2. The cooling fans will complete the cooling cycle for about 60 seconds and the
POWER LED will flash Blue. The projector has entered standby mode. If you
wish to turn the projector back on, you must wait until the projector has com-
pleted the cooling cycle and has entered standby mode. Once in standby mode,
simply press the “ ” button on the control panel of the projector or “Power On”
button on the remote control to restart the projector.
②
3. Power off the switch
③
.
4. Disconnect the power cord from the electrical outlet and from the projector.
Serial
Trigger out
(12V)
Computer In Monitor out
LAN
3
Input
Info.
Auto
Lens
1
2
Do not turn on the projector immediately following the power off procedure.