88
OP-P1/MF1 Training
Slide 88
Refilling the AIO
(All models except the Europe and N. America models)
The AIO is easy to refill. (Just remove caps to refill the
toner and remove waste toner. There are no screws to
remove.)
Drum life is the limiting factor. The AIO can be refilled 2 or 3
times (depends on use).
Genuine refill toner provides cost savings with stable
quality.
Study the refill procedure in the FSM.
FSM
Replacement and Adjustment
Refilling the AIO
Observe all notes and cautions.
Note for 4-in-1 models
When an AIO is refilled, the amount of toner in the AIO may
not be the same as for a new AIO. Therefore, the dot count
for toner end detection is not done.
Because of this, when using a refilled AIO, the machine
cannot detect toner near-end or toner end. The machine
always behaves as though ‘Continue Printing’ was selected,
even if ‘Stop Printing’ was selected.
Service Manual > Replacement and Adjustment > Refilling
the AIO