Ricoh M052, Manual

Page: 49 / 191

SH-MF1 Training
49
Slide 49
Alert Display & Machine Condition
‰
The table below shows the alert display for supply items.
Message is
not shown
(2) Message is
not shown
(2) Message
is shown Message is
shown Useable 1250 prints
before the end 120K
prints Replace Kit SP5200
Toner "End"
message is
shown (1) Toner "Near
End"
message is
shown (1) Toner
"End"
message
is shown Toner
"Near End"
message is
shown Cannot
print 1250 prints
before the end 25K
prints Replace Print cartridge
(AIO)
End Near end End Near end
Alert:
(Meter click charge ON,
SP5930-1 set to 1) Alert:
(Meter click charge
OFF, SP5930-1 set to
0, = default) Machine
condition
at the
end Near End
Alert Timing Alert
timing Action Maintenance
Kit
‰
The yield figures in the above table are based on the following conditions:
Š
A4 (LT) short-edge feed
Š
5% image coverage
Š
The expected yield measurement for the Print Cartridge is based on ISO 19798.
‰
(1) In addition to the toner Near End/End messages, you can also turn on drum yield
Near End/End messages with SP5930-003. 0 = message shown, 1 = message not
shown (Default: 1)
‰
(2) SP5930-002 sets the display for Kit SP5200 when meter click charge is ON. 0 =
message shown, 1 = message not shown (Default: 1)
No additional notes.