Troubleshooting
22
3
When Multiple Sheets Are Fed at the Same Time
Follow the procedure below to correct a multiple sheet feed problem.
AAAA
Adjust the feeding pressure lever according to the thickness of the paper
loaded.
Note
❒
The appropriate feeding pressure lever positions according to the weight
of the paper are as follows.
❒
If multiple sheets of paper are fed at the same time when the feeding pres-
sure lever is set to Standard, set the feeding pressure lever to Thin.
❒
If paper is not fed at all when the feeding pressure lever is set to Thin, set
the feeding pressure lever to Standard.
❒
Paper heavier than 127.9 – 209.3 g/m
2
(34.0 – 55.6 lb.) is categorized as
thick paper. However, for B5 JIS paper heavier than 127.9 g/m
2
(34.0 lb.),
set the feeding pressure lever to Standard.
❒
When paper is still not fed properly even after the feeding pressure lever
is adjusted, increase the paper feeding pressure of the machine.
BBBB
If the problem still persists, take the paper out and fan it before loading it again.
Metric version
Inch version
Thick
127.9 – 209.3 g/m
2
34.0 – 55.6 lb.
Standard
52.3 – 127.9 g/m
2
13.9 – 34.0 lb.
Thin
47.1 – 52.3 g/m
2
12.5 – 13.9 lb.
ABQ025S
LCS_EN-F_FM.book Page 22 Wednesday, November 5, 2003 2:44 PM
Summary of Contents for LS3000
Page 14: ...Before Using the LS3000 10 1 ...
Page 24: ...Getting Started 20 2 ...
Page 37: ...33 MEMO ...
Page 38: ...34 EN USA C625 8601 MEMO ...
