Basics
30
2
Basic Procedure
When Auto Cycle mode is on, you
can process masters and make prints
in a single operation.
Note
❒
You can process masters and make
prints in a single operation. See
p.35 “Auto Cycle”.
❒
If the machine has user codes set,
enter your user code using the
number keys, and then press the
{
OK
}
key.
Reference
See p.113 “User Code”.
A
Make sure no previous settings
remain.
Note
❒
If previous settings remain, press
the
{
Clear Modes/Energy Saver
}
key before entering your set-
tings.
B
Place the originals.
Reference
See p.28 “Placing Originals”.
C
Make sure the
{
Master Making
}
mode select key is lit.
Note
❒
If it is not lit, press the
{
Master
Making
}
mode select key.
D
Make the necessary settings.
E
Press the
{
Start
}
key.
Master making starts.
Note
❒
Press the
{
Proof
}
key to check
the image before making prints.
Reference
To change the image position,
see p.37 “Adjusting the Print
Image Position”.
F
Make sure the
{
}
mode select
key is lit.
ANT128S
ANT123S
ANT127S
C2758608_Platinum3-EN.book Page 30 Monday, August 31, 2009 2:32 PM
Summary of Contents for LDD130
