Ricoh LDD130 Operating Instructions Manual Download Page 15

Page: 15 / 140

Guide to Components

Front cover

Open for access to the inside of the ma-
chine.

Control panel

Operator controls and indicators are lo-
cated here. See p.12 “Control Panel”.

Exposure glass cover (optional) or

Auto Document Feeder (optional)

Lower this cover over an original on the
exposure glass. If you have the ADF, load
a stack of originals here. They will be fed
automatically, one by one.
(The illustration shows the ADF.)

Master tray

Open this tray when installing the mas-
ter.

Feed roller pressure lever

Use to adjust the contact pressure of the
paper feed roller according to paper
thickness.

Separation pressure lever

Use to prevent double feed.

Paper feed side plate lock lever

Use to lock or unlock the paper feed side
plates.

Side tray fine adjusting dial

Use to shift the paper feed tray sideways.

Paper feed tray

Set paper on this tray for printing.

10.

Paper feed side plates

Use to prevent paper skew.

11.

Paper feed tray down key

Press to lower the paper feed tray.

ANT046S

C2758608_Platinum3-EN.book Page 9 Monday, August 31, 2009 2:32 PM

Summary of Contents for LDD130













































































































































Search results

Summary of Contents for LDD130

Reviews:

Brands by name

Popular brands

Ricoh LDD130, Operating Instructions Manual

Search results

Summary of Contents for LDD130

Reviews:

Brands by name

Popular brands