manualshive.com logo in svg

Ricoh LDD130, Operating Instructions Manual

Share
Download
Ricoh LDD130 Operating Instructions Manual Download Page 125

Where to Put Your Machine

119

6

Power Connection

R

 

WARNING:

R

 

CAUTION:

R

 

CAUTION:

• The socket-outlet shall be installed near the machine and shall be easily acces-

sible.

• Voltage must not fluctuate more than 10%.

Access to Machine

Place the machine near the power source, providing clearance as shown.

❖

Main Frame

1.

More than 10 cm, 4.0"

2.

More than 60 cm, 23.7"

3.

More than 60 cm, 23.7"

4.

More than 60 cm, 23.7"

•

Connect the power cord directly into a wall outlet and never use an ex-
tension cord.

•

Only connect the machine to the power source describe in the manual.

•

Do not damage, break or make any modifications to the power cord. 
Do not place heavy objects on it. Do not pull it hard nor bend it more 
than necessary. These actions could cause an electric shock or fire.

•

Unplug the power cord from the wall outlet before you move the machine. 
While moving the machine, you should take care that the power cord will not 
be damaged under the machine.

•

When you disconnect the power plug from the wall outlet, always pull the 
plug (not the cable).

1

3

2

4

GRINST0E

C2758608_Platinum3-EN.book  Page 119  Monday, August 31, 2009  2:32 PM

Summary of Contents for LDD130













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands