Ricoh LDD130 Operating Instructions Manual Download Page 79

Page: 79 / 140

When the Add Ink Indicator (

) Lights

When the Add Ink Indicator (

) Lights

The

Add Ink

indicator (

) lights when it is time to supply ink.

CAUTION:

Important

❒

Faults may occur if you use ink other than the recommended type.

❒

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you use only the expendable supplies available
at an authorized dealer.

Note

❒

Be sure to supply ink of the same color as the current drum.

❒

Store ink in a cool, dry place. Do not store ink where it will be exposed to heat
or direct sunlight.

❒

Store ink on a flat surface.

•

Keep the ink or ink container out of reach of children.

•

Be careful not to get ink on your clothes when replacing an ink container. Ink
stains on clothes are hard to remove.

•

When disposing of a used ink container, reattach the cap to prevent ink from
splattering.

•

If your skin comes into contact with ink, wash the affected area thoroughly
with soap and water.

•

If ink comes into contact with your eyes, rinse immediately in running water.
For other symptoms, consult a doctor.

•

If ink is ingested, induce vomiting by drinking a strong saline solution. Con-
sult a doctor immediately.

C2758608_Platinum3-EN.book Page 73 Monday, August 31, 2009 2:32 PM

Summary of Contents for LDD130













































































































































Search results

Summary of Contents for LDD130

Reviews:

Brands by name

Popular brands

Ricoh LDD130, Operating Instructions Manual

Search results

Summary of Contents for LDD130

Reviews:

Brands by name

Popular brands