Ricoh LDD130, Operating Instructions Manual

Page: 119 / 140

User Code
113
5
User Code
In User Code mode, users need to en-
ter a user code before they can use the
machine. The machine keeps count of
the numbers of masters and prints
under each user code.
Note
❒
To use this feature, User Code
mode must be set to “Use”. See “3
User Code Management” on p.110
“6 Administrator Tools”.
❒
When the User Code mode is on,
the machine will prompt you for
your user code when you turn on
the main switch, or after the ma-
chine has been reset.
❒
The following user codes are avail-
able:
• 000, 019, 028, 037, 046, 055, 064,
073, 082, 091, 100, 119, 128, 137,
146, 155, 164, 173, 182, 191, 200,
219, 228, 237, 246, 255, 264, 273,
282, 291, 300, 319, 328, 337, 346,
355, 364, 373, 382, 391, 400, 419,
428, 437, 446, 455, 464, 473, 482,
491, 500, 519, 528, 537, 546, 555,
564, 573, 582, 591, 600, 619, 628,
637, 646, 655, 664, 673, 682, 691,
700, 719, 728, 737, 746, 755, 764,
773, 782, 791, 800, 819, 828, 837,
846, 855, 864, 873, 882, 891, 900,
919, 928, 937, 946, 955, 964, 973,
982, 991
Entering the User Code to Use
the Machine
A
Enter your 3–digit user code with
the number keys.
Note
❒
The user code will not displayed
on the panel display.
❒
If you have made a wrong en-
try, press the
{
Clear/Stop
}
key
and enter the number again.
B
Press the
{
OK
}
key.
C
Make your Prints.
D
After printing, press the
{
Clear
Modes/Energy Saver
}
key and the
{
Clear/Stop
}
key at the same time.
The User Code mode is once again
set. Other users will not be able to
make prints using your user code.
C2758608_Platinum3-EN.book Page 113 Monday, August 31, 2009 2:32 PM