Ricoh LD135 Operating Instructions Manual Download

Page: 23 / 132

Placing Originals

Press

[

Special Original

]

Select the original orientation.

Standard orientation

Make sure that

is select-

ed.

turn

Place your original in the land-
scape orientation, and then
press

Press

[

]

Placing Originals on the
Exposure Glass

Lift the exposure glass cover or
ADF.

Important

Do not lift the exposure glass
cover or ADF forcefully. Other-
wise, the cover of the ADF
might open or be damaged.

Note

Be sure to lift the exposure glass
cover or ADF by more than 30

Otherwise, the size of the origi-
nal might not be detected cor-
rectly.

Place the original face down on
the exposure glass. The original
should be aligned to the rear left
corner.

Positioning mark

Left scale

Note

Start with the first page to be
copied.

Lower the exposure glass cover or
ADF.

ZEWH050E

All manuals and user guides at all-guides.com

Summary of Contents for LD135





































































































































Search results

Summary of Contents for LD135

Reviews:

Related manuals for LD135

Brands by name

Popular brands

Ricoh LD135, Operating Instructions Manual

Search results

Summary of Contents for LD135

Reviews:

Related manuals for LD135

Brands by name

Popular brands