Ricoh LD013, Service Manual

Page: 479 / 513

SERVICE RAM ADDRESSES
B404 5-62 SM
6800C4(H) - User parameter switch 04 (SWUSR_04: Automatic report
printout)
Bits 0 to 6: Not used
Bit 7: Inclusion of a sample image on reports
0: Off, 1: On
6800C5(H) - User parameter switch 05 (SWUSR_05)
Bit 0: Substitute reception when the base copier is in an SC condition
0: Enabled, 1: Disabled
Bits 1 and 2: Condition for substitute rx when the machine cannot print messages
(Paper end, Toner end, and Jam during night mode)
Bit 2 1 Setting
0 0 The machine receives all the fax messages.
0 1 The machine receives the fax messages with RTI or CSI.
1 0 The machine receives the fax messages with the same ID code.
1 1 The machine does not receive anything.
Bit 3: Not used
Bit 4: Restricted Access using personal codes
0: Off, 1: On
Bit 5: Just size printing 0: Off, 1: On
Bit 6: Not used
Bit 7: Add paper display when a cassette is empty
0: Off, 1: On
6800C6(H) - User parameter switch 06 (SWUSR_06)
Bit 0: Not used
Bits 1 to 3: Not used
Bit 4: Quick dial label print format
0: Suitable for white paper, 1: Suitable for transparent paper
Bits 5 to 7: Not used
6800C7(H) - User parameter switch 07 (SWUSR_07)
Bits 0 and 1: Not used
Bit 2: Parallel memory transmission
0: Off, 1: On
Bits 3 to 7: Not used
6800C8(H) - User parameter switch 08 (SWUSR_08)
Bits 0 and 1: Not used.
Bit 2: Authorized reception
0: Only faxes from senders whose RTIs/CSIs are specified for this feature are
accepted.
1: Only faxes from senders whose RTIs/CSIs are not specified for this feature
are accepted.
Bits 3 to 7: Not used.
6800C9(H) - User parameter switch 09 (SWUSR_09)
Bits 0 to 7: Not used