Ricoh LD013, Service Manual

Page: 385 / 513

F
ax Un
it
B4
04
INSTALLATION REQUIREMENTS
SM 1-1 B404
1. INSTALLATION
NOTE: 1) Never install telephone wiring during a lightning storm.
2) Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
3) Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
4) Use caution when installing or modifying telephone lines.
5) Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
6) If there is a gas leak, do not use the telephone in the vicinity of the leak
to report it.
!
CAUTION
1. Before installing the fax unit, switch off the main power and operation
switches, and disconnect the power cord.
2. The fax unit contains a lithium battery. The danger of explosion exists if
a battery of this type is incorrectly replaced. Replace only with the same
or an equivalent type recommended by the manufacturer. Discard used
batteries in accordance with the manufacturer’s instructions.
1.1 INSTALLATION REQUIREMENTS
1.1.1 ENVIRONMENT
Refer to the base copier’s service manual.
1.1.2 MACHINE LEVEL
Refer to the base copier’s service manual.
1.1.3 MINIMUM SPACE REQUIREMENTS
Refer to the base copier’s service manual.
1.1.4 POWER REQUIREMENTS
Refer to the base copier’s service manual.