Ricoh LD013, Service Manual

Page: 142 / 513

Serv
ic
e
Ta
b
le
s
USING SERVICE PROGRAM MODES
SM 5-1 B039/B040/B043
5. SERVICE TABLES
5.1 USING SERVICE PROGRAM MODES
Use the service program modes (SP modes) to check electrical data, change
operating modes, and adjust values.
Accessing SP Modes
How to Enter SP Mode
1. Key in the following sequence.
!
→
"
→
#
→
$
→
%
•
Hold the
%
key down for longer than 3 seconds.
2. The LCD displays a menu of the SP modes.
NOTE: Installed applications appear on the menu as follows: “1.Copy”, “2.
Fax”, “3. Printer”, If an application is not installed, the corresponding
item does not appear.
3. Press the number for the application mode you need. (For example, press “1”
to select the copier application mode.) The selected SP mode display appears
on the LCD, as shown.
How to Exit SP Mode
Press
!
or Cancel key one or more times to return to the standby-mode
display.
Accessing Copy Mode from within an SP Mode
1. Press the
&
key.
2. Select the appropriate copy mode and make trial copies.
NOTE: The User Tools key LED is blinking at this time.
3. To return to SP mode, press the
!
key.
[Service P-Mode]
1 Copy 2 Fax 3 Printer
No._
B039M001.WMF
SP B0395533A
No.1 Feed
EU Class1
B039M002.WMF