Ricoh K-C3, Service Manual

Page: 166 / 289

B245/B276/B277/B268/B269 Service Manual 18-Jan-06
157
counter will both increment by two for each A3/11" x 17" sheet.
5113*
Optional Counter Type
0: None
11: MF key card (Increment)
12: MF key card (Decrement)
5113 1 Selects the corresponding key for installed devices such as coin lock.
5120*
Clr-OP Count Remv [0=Yes /
1=Standby only
/ 2=No]
5120 1
Determines under which conditions the copy job settings are reset when the key
counter is removed. With 0, the settings are cleared if the counter is removed at
the end of a job or midway through a job. With 1, they are only cleared if the
counter is removed at the end of a job. With 2, they are not cleared at all, under
either condition. With duplex copies, the job settings are always preserved,
regardless of the setting of this SP mode.
5121*
Count Up Timing
[
0 = Feed In
/ 1 = Exit]
5121 1
Selects whether the key counter increments at time of paper feed-in or at time of
paper exit.
5127*
APS Mode [
0 = Enabled
/ 1 = Disabled]
5127 1 Enables or disables the APS mode..
5501*
PM Alarm Interval (Printout) [0 ~ 9999 /
0
/ 0K copies/step]
5501 1 Specifies when the PM alarm occurs.
5801
Memory Clear
5801 2 Engine ( p.174)
5802
Machine Free Run
5802 1
Starts a free run of both the scanner and the printer. Press "ON" to start; press
"OFF" to stop.
Input Check
5803
( p.176)