Ricoh IPSiO PJ WX3130, Owner'S Manual

Page: 88 / 104

88
The Default setting menu
This menu shows placement status and other settings.
Default setting 1 menu
Item
Description
Auto keystone Always correct keystone distortion automatically. On Off
No signal
power off Set the time to wait for the power to be turned off after the last operation is
made with no input signal.
Off (not turned off) 30 min.
Auto input
search
Set whether the input with signals is only selected or not. On Off
Beep
Beep when operation is made.
On Off
Power on Sets whether to turn on the power when the ON/STANDBY button is pressed
(Manual), or when the power cord is plugged in (Auto).
Manual Auto
Lamp power
Set the lamp power.
Low Standard
Detailed description
[Auto input search]
[ On ]: Automatically searches the signals that can be
projected, and switches input from the connected
device that outputs the video signals each time
the
INPUT button is pressed. The input from the
connected device that outputs no video signals is
skipped.
[
Off
]: Displays the
Input select
menu.
Toggle with buttons and press button.
(The input without signals can be also selected.)
Note
In normal operation, set [
Auto input search
] to [
On
].
Set to [
Off
] when you want to select the input source from Input select menu, or if
the image does not appear properly.
[Power on]
If [ Power on ] is set to [ Auto ] and there is a power outage, the projector will come on
once power is restored.
[Lamp power]
When [
Lamp power
] is set to [
Low
], the screen becomes a little darker, but the cooling
fan noise gets quieter.
■
•
Computer 1
Y/P
B
/P
R
1
Computer 2
Y/P
B
/P
R
2
Video
S-video
Input select
/ shows whether signal is
input or not.
Input select menu
Using the menus (Continued)