manualshive.com logo in svg

Ricoh HQ Opal, Operating Instructions Manual

Share
Download
Ricoh HQ Opal Operating Instructions Manual Download Page 6

iv

How to Read This Manual

Symbols

In this manual, the following symbols are used:

R

 

WARNING:

This symbol indicates a potentially hazardous situation that might result in
death or serious injury when you misuse the machine without following the in-
structions under this symbol. Be sure to read the instructions, all of which are de-
scribed in the Safety Information section.

R

 

CAUTION:

This symbol indicates a potentially hazardous situation that might result in mi-
nor or moderate injury or property damage that does not involve personal injury
when you misuse the machine without following the instructions under this
symbol. Be sure to read the instructions, all of which are described in the Safety
Information section.
* The statements above are notes for your safety.

Important

If this instruction is not followed, paper might be misfed, originals might be
damaged, or data might be lost. Be sure to read this.

Preparation

This symbol indicates the prior knowledge or preparations required before op-
erating the machine.

Note

This symbol indicates precautions for operation, or actions to take after misop-
eration.

Limitation

This symbol indicates numerical limits, functions that cannot be used together,
or conditions in which a particular function cannot be used.

Reference

This symbol indicates a reference.

[

]

Keys that appear on the machine's display panel.

{

}

Keys built into the machine's operation panel.

C6398601_HQOPAL-GB.book  Page iv  Monday, June 27, 2005  2:26 PM

Summary of Contents for HQ Opal

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands