Ricoh HQ Opal Operating Instructions Manual Download

Page: 45 / 88

2. User Tools

Accessing the User Tools

The user tools allow you to customize
various default settings. This section
is intended for the machine adminis-
trator.

Press the

{

User Tools

}

key.

Using the

{

}

, or

{

}

key

Search for the desired user tool
number with the

{

}

{

}

key.

Using the number keys

Enter the desired user tool number
with the Number keys.

Change the settings by following
the instructions on the panel dis-
play. Then press the

[

]

key.

Press the

{

User Tools

}

key to return

to the standby display.

Note

❒

The settings are not canceled
even if the main switch is
turned off or the

{

Clear Modes

}

key is pressed.

C6398601_HQOPAL-GB.book Page 35 Monday, June 27, 2005 2:26 PM

Summary of Contents for HQ Opal

























































































Search results

Summary of Contents for HQ Opal

Reviews:

Related manuals for HQ Opal

Brands by name

Popular brands

Ricoh HQ Opal, Operating Instructions Manual

Search results

Summary of Contents for HQ Opal

Reviews:

Related manuals for HQ Opal

Brands by name

Popular brands