Ricoh HQ Opal, Operating Instructions Manual

Page: 22 / 88

Operation
12
1
Adjusting the Paper Alignment Wings
and Chocks
Use the paper alignment wings and
chocks to stack printed paper neatly.
Note
❒
Prints may be delivered curled up
if they contain large areas of solid
image. If this happens, raise the
paper alignment wings to about 45
degrees. When printing on B5
L
of
52.3 g/m
2
, 13.9 lb or thinner, slide
the chocks up together.
❒
Depending on the type of paper
you are using, you may not be able
to load to capacity (1000 sheets)
when the wings are raised.
❒
When printing on 52.3 g/m
2
, 13.9
lb or thinner at a fast speed, paper
jams (C) may occur in the paper
exit area. If this happens, do the
following:
• Decrease print speed. See p.32
“Changing the Printing Speed”.
• Lower the paper alignment wings.
• Push the end plate toward the
paper delivery tray edge.
❒
When the paper alignment wings
are raised, prints may not be deliv-
ered neatly stacked, depending on
paper type. If this happens, lower
the wings.
❖
Paper alignment wings
Adjust the paper alignment wings.
1.
Raise the wings fully.
2.
Raise the wings to about 45 degrees.
❖
Chocks
Slide the chocks up or down to ad-
just them to paper size and thick-
ness.
Adjust the paper alignment wings
and chocks according to paper size
and thickness, as follows:
ACY053S
ACY054S
C6398601_HQOPAL-GB.book Page 12 Monday, June 27, 2005 2:26 PM