Ricoh HQ Opal Operating Instructions Manual Download Page 59

Page: 59 / 88

When the Add Ink Indicator (

) Lights

When the Add Ink Indicator (

) Lights

The

Add Ink

indicator (

) lights

when it is time to supply ink.

CAUTION:

Note

❒

Be sure to supply ink of the same
colour as the current drum.

❒

Ink is readily removed from skin
by waterless hand cleaners fol-
lowed by washing with soap and
water.

❒

Be careful not to get any ink on your
clothing.

❒

Store ink under low temperature
and humidity conditions.

❒

Do not store ink where it will be
exposed to heat or direct sunlight.

❒

Store on a flat surface.

Open the front door.

Pull out the ink holder.

Remove the used ink cartridge.

Remove the cap of the new ink car-
tridge.

Insert the new cartridge into the
ink holder.

Note

❒

Always supply ink of the same
colour.

•

If ink comes into contact with
your eyes, rinse immediately in
running water. For other symp-
toms, consult a doctor.

•

Keep the ink or ink container out
of reach of children.

•

If ink is ingested, induce vomiting
by drinking a strong saline solu-
tion. Consult a doctor immediately.

•

Our products are engineered to
meet high standards of quality
and functionality, and we recom-
mend that you use only the ex-
pendable supplies available at an
authorized dealer.

C6398601_HQOPAL-GB.book Page 49 Monday, June 27, 2005 2:26 PM

Summary of Contents for HQ Opal

























































































Search results

Summary of Contents for HQ Opal

Reviews:

Brands by name

Popular brands

Ricoh HQ Opal, Operating Instructions Manual

Search results

Summary of Contents for HQ Opal

Reviews:

Brands by name

Popular brands