Ricoh FT8680OM, Operating Instructions Manual

Page: 75 / 160

1
Touch the [Edit Image] key.
2
Make sure that the [Save/Delete]
key is selected.
3
To uch the [Save Area] k e y.
Then, touch the [#] key.
4
Designate the area you want to save following the instructions on the
display.
❐ To change the number entered:
Before touching the [#] key, press the Clear/Stop key. After touching the [#]
key, touch the key which number you want to change. Then, enter the new
number.
5
Set your originals on the exposure glass or in the document feeder.
6
Press the Start key.
Erasing part of original image (Delete Area)
❐
When making copies after designating the area, set the original on the expo-
sure glass or in the document feeder as shown in the illustrations on page 66.
❐ The designated line will vary by
±
5 mm or 0.2". Therefore, leave at least 5 mm
or 0.2" between the designated line and the image. If this clearance is narrower
than 5 mm or 0.2", an undesired area might be deleted or saved.
tb-eu-5
C
OPY
IN
G
EDITING THE COPY IMAGE (Edit Image)
67