Ricoh FT8680OM, Operating Instructions Manual, Page: 131 / 160

Feed out Proof
copy on the
Proof Copy tray
This function can be used only when your copier is equipped with
the optional sorter stapler. The proof copy is delivered to the
proof tray as a default setting. You can cancel this setting and set
the copier to deliver the proof copy to the tray between the copier
and the sorter stapler (bypass exit tray).
☛
See page 2 for the
position of the bypass exit tray.
❐ default: No
Set the width of
erase center
You can adjust the default center margin width in Erase Center
mode. You can select the width as follows:
Metric version: 0 mm, 15 mm, 25 mm, 35 mm
Inch version: 0", 0.6", 1.0", 1.4"
❐ default: Metric version: 25 mm, Inch version: 1.0"
Set the width of
erase border
You can adjust the default edge margins width in Erase Center
mode. You can select the width as follows:
Metric version: 2 mm, 7 mm, 12 mm, 17 mm, 22 mm
Inch version: 0.1", 0.3", 0.5", 0.7", 0.9"
❐ default: Metric version: 7 mm, Inch version: 0.3"
❐ When you set Full image mode (
☛
see page 121), you can
select 0 mm or 0".
Set the back side
margin
When you make two-sided copies from one-sided originals, a right
margin is set on the back side automatically. You can adjust the
margin width as follows:
Metric version:
From 0 to 21 mm (For each left and right margin)
Inch version:
From 0" to 7/8" (For each left and right margin)
❐ default: Metric version: 5 mm (right margin),
Inch version: 1/4" (right margin)
C
H
A
N
GIN
G T
HE C
OPIER
’S
SET
TI
N
G
S
tb-eu-7
USER TOOLS
123