Ricoh FT8680OM Operating Instructions Manual Download Page 117

Page: 117 / 160

CLEARING MISFEEDS

WARNING: Since some parts of the copier are supplied with high elec-

trical voltage, touch only the parts specified in the instruc-
tions on the stickers inside the machine’s cover.

WARNING: When removing misfed paper from sections H and I, use

caution. The fusing unit may be very hot.

☛

See page 4 for

the position of the fusing unit.

CAUTION: Do not leave any torn scraps of paper in the machine.

NOTE: When clearing misfeeds, do not turn off the main switch. If you do,

your copy settings will be cleared.

NOTE: After clearing misfeeds, make sure that all units and levers are re-

turned to their original positions and all covers are closed.

NOTE: Do not touch originals in the document feeder when a paper mis-

feed occurs in the copier. If you do, the copier cannot determine
which originals have been copied, and which haven’t.

Check The Misfeed Location Display

The display shows the location of
misfed paper.

T T

IF SOM

HIN

GOES W

tb-eu-6

CLEARING MISFEEDS

109

Summary of Contents for FT8680OM

































































































































































Search results

Summary of Contents for FT8680OM

Reviews:

Related manuals for FT8680OM

Brands by name

Popular brands

Ricoh FT8680OM, Operating Instructions Manual

Search results

Summary of Contents for FT8680OM

Reviews:

Related manuals for FT8680OM

Brands by name

Popular brands