Ricoh FT8680OM Operating Instructions Manual Download Page 38

Page: 38 / 160

Adjust the guide to the original
size.

Set the original

face down

into

the document feeder until the In-
sert Original indicator goes off.

❐

If you are copying a stack of originals
one sheet at a time and you want to
keep them in order, start with the first
page of the originals.

❐

The original guide must touch the
front side of the original.

Press the Start key.

While the Auto Feed indicator is
lit after an original is fed, set the
next original. The original is auto-
matically fed and copied.

❐

If you have set more than two origi-
nals, the Auto Feed indicator is not
lit after the last original is fed. In this
case, press the Start key again after
setting an original.

tb-eu-4

SETTING ONE ORIGINAL AT A TIME IN THE DOCUMENT FEEDER (SADF)

Summary of Contents for FT8680OM

































































































































































Search results

Summary of Contents for FT8680OM

Reviews:

Related manuals for FT8680OM

Brands by name

Popular brands

Ricoh FT8680OM, Operating Instructions Manual

Search results

Summary of Contents for FT8680OM

Reviews:

Related manuals for FT8680OM

Brands by name

Popular brands