T
echnical
B
ulletin
PAGE: 3/14
Model:
Finisher SR5040/SR5030 (D512/D513)
Date:
16-Dec-11
No.:
RD512002
Action
1. On your next service visit, measure the gap between the End Fence and the Exit Rollers
([C] and [D]).
[A]: Exit Rollers
[B]: End Fences,
[C]: Gap at Rear Side
[D]: Gap at Front Side
2. If the measurements of the 2 locations [C] and [D] are 2.5 mm (approximately 0.1 inch)
or smaller, replace the End Fence and the Exit Rollers with the countermeasure parts
as a set.
NOTE:
Countermeasure parts are supplied as P/N D0749902 (End Fence Kit).
P/N D0749902 (End Fence Kit) consists of the above two parts.
NOTE: P/N D0749902 is supplied as a temporary countermeasure part.
Countermeasure End Fence
(Length of the end fence edges has been
shortened to prevent contact with the roller.)
Exit Roller Assembly
FRONT
REAR
[A]
[B]
[C]
[D]
[D]