T
echnical
B
ulletin
PAGE: 1/14
Model:
Finisher SR5040/SR5030 (D512/D513)
Date:
16-Dec-11
No.:
RD512002
Subject:
Finisher SR5030 Exit Roller damage by End
Fence.
Prepared by:
Hiroaki H Matsui
From:
PP Service Planning Department 1G
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other (
)
Tier 2
Symptom
If a sufficient gap [A] is not secured between the End Fence [B] and the Exit Roller [C], the
tip of the End Fence [B] could abrade the Exit Roller [C] in the worst case.
NOTE:
This symptom occurs ONLY on the Finisher SR5030 and will not occur on the Booklet
Finisher SR5040.
Cause
A sufficient gap is not secured between the exit roller [C] and the tip of the end fence [B]
due to the inaccurate dimensions of the End Fence.
[C]
[B]
[A]