manualshive.com logo in svg

Ricoh FAX3800L, Operator'S Manual, Page: 67 / 246

Share
Download
Ricoh FAX3800L Operator'S Manual Download Page 67

Storing a Keystroke Program

1.  Make sure that the machine is in standby

mode (see page 20).

READY        100% 10:00

SET DOC. OR DIAL NO.

2.  Place a sheet of paper in the feeder.

❐

Skip step 2 if you are making a Polling
Reception program.

TRANSMIT        OPTION

k

DIAL FAX NUMBER

3.  Select all required features (such as

Transfer Request) and telephone num-
bers as you would normally do.

❐

Contrast, resolution, and halftone cannot
be stored in a keystroke program.

4.  Press the Quick Dial key that you wish to

store the program in.
Example: 01 of the Quick Dial

PROGRAM                Y/N

PROGRAM?

❐

Make sure that this key is vacant.

5.  To complete the program: Yes 

Note: The procedure that you just stored will now begin. If you do not wish to

use the procedure now, press Stop immediately.

TRANSMISSION

ADVANCED FEATURES

56

Summary of Contents for FAX3800L























































































































































































































































Reviews:

No comments