Ricoh FAX3800L Operator'S Manual Download Page 160

Page: 160 / 246

7. Install the new cleaning pad.

Match the position of the arrow on
the cleaning pad with the arrow on
the inside the machine.

Note: Push the cleaning pad until

you hear it clicking.

Important: Do not forget to install the

cleaning pad. If not in-
stalled correctly, damage
may be caused to the ma-
chine.

8. Close the upper cover and lower the op-

eration panel until it clicks.

Note: If the upper cover does not close, the

toner cassette or cleaning pad is not
correctly installed.

OOKI

G AF

E MA

CHI

LOOKING AFTER THE MACHINE

REPLACING TONER CASSETTE AND CLEANING PAD

149

Summary of Contents for FAX3800L























































































































































































































































Search results

Summary of Contents for FAX3800L

Reviews:

Related manuals for FAX3800L

Brands by name

Popular brands

Ricoh FAX3800L, Operator'S Manual

Search results

Summary of Contents for FAX3800L

Reviews:

Related manuals for FAX3800L

Brands by name

Popular brands