Ricoh CX2 User Manual Download Page 81

Page: 81 / 248

Sh
oo
ting

Mod

e Typ

This mode creates pictures that appear to be photos of dioramas.
It is most effective when pictures are taken from a high vantage
point.

Turn the mode dial to SCENE.

• The camera is ready to shoot and the selected scene mode is

displayed at the top of the picture display.

Press the MENU button.

• The scene mode selection screen appears.

Press the ADJ./OK button

!"#$

to select

[Miniaturize].

Press the ADJ./OK button.

Press the Fn button.

• Miniaturization settings will be

displayed, with the areas that will not
be in focus in the final photograph
shown in gray.

• Press the DISP. button to exit without

taking a picture.

Note ----------------------------------------------------------------------------------------------

When taking pictures in tall orientation, press the

button to re-orient the area that will be in focus.

Shooting in Miniaturization Mode

Summary of Contents for CX2

























































































































































































































































Search results

Summary of Contents for CX2

Reviews:

Related manuals for CX2

Brands by name

Popular brands

Ricoh CX2, User Manual

Search results

Summary of Contents for CX2

Reviews:

Related manuals for CX2

Brands by name

Popular brands