Ricoh CX2 User Manual Download Page 70

Page: 70 / 248

Usin

g t
h

e F
n

(F
un
ctio

n)
But
ton

Assigning [AE Lock] to the Fn (Function) button (

P.174) and

then pressing the Fn button during shooting allows you to lock or
cancel the exposure.

Turn the mode dial to

, SCENE,

Set [Set Fn Button] to [AE Lock] on the setup menu.

• For the operating procedure, see P.174.

Check that the camera is ready to shoot.

Put the subject of your photo in the center of the picture
display and press the Fn button.

• The exposure is locked and the AEL

mark, aperture value, and shutter
speed appear on the screen.

• Pressing the Fn button again cancels

the AE lock.

Note ----------------------------------------------------------------------------------------------

•

The AE lock function can only be used when [Time Exposure] is set to [Off].

•

AE lock is not available when [AUTO] is selected for [Dynamic Range Expansion].

Locking the Exposure

Summary of Contents for CX2

























































































































































































































































Search results

Summary of Contents for CX2

Reviews:

Related manuals for CX2

Brands by name

Popular brands

Ricoh CX2, User Manual

Search results

Summary of Contents for CX2

Reviews:

Related manuals for CX2

Brands by name

Popular brands