Ricoh CX2 User Manual Download Page 188

Page: 188 / 248

186

Set
up Menu

Display the setup menu.

• For the operating procedure, see P.166.

Press the ADJ./OK button

select [Digital Zoom Image]
and press the button

Press the button

to select

[Auto Resize].

Press the ADJ./OK button.

Turn and hold the zoom lever
toward

(Telephoto) until

the maximum magnification is
reached on the zoom bar, then
momentarily release the zoom
lever, and then turn the zoom
lever again toward

• Each time you turn the zoom lever toward

, the image is resized by

one setting.

• The size at which the image is recorded is displayed above the zoom

bar.

Caution------------------------------------------------------------------------------------------

•

This function is not available when scene mode is set to [Skew Correct Mode]. If [Auto
Resize] is set in these situations, the digital zoom is activated instead.

•

If the picture quality is set to Fine mode and the auto resize zoom is used, the
compression ratio changes to Normal when recording.

Summary of Contents for CX2

























































































































































































































































Search results

Summary of Contents for CX2

Reviews:

Related manuals for CX2

Brands by name

Popular brands

Ricoh CX2, User Manual

Search results

Summary of Contents for CX2

Reviews:

Related manuals for CX2

Brands by name

Popular brands