• Rear/Front 2 staples
The stapler movement motor [A] drives a timing belt that moves stapler [B] left and right on its stainless steel
rail.
The stapler rotation motor [C] rotates the stapler into position for diagonal stapling at the rear.
• The stapler movement motor switches on and moves the stapler the standby stapling position. (This is
the stapling position for the paper size selected for the job.)
• The stapler movement motor switches off and the stapler waits for the signal to fire (or swivel and for
diagonal stapling).
If the stack is to be stapled at two positions:
• The stapler movement motor moves the stapler to the front position and staples the front.
• The stapler movement motor moves the stapler to the rear and the stapler staples the rear.
If the stack is stapled at the rear with a diagonal staple, the staple moves to the rear. When it is time for
stapling, the rotation motor rotates the stapler to the correct angle and holds the stapler in that position
while the stapler fires.
The stapling positions can be fine adjusted with SP6-133-001.
2. Detailed Section Descriptions
56
2
