Ricoh Aficio IS 2325 Operating & Troubleshooting Instructions Download Page 92

Page: 92 / 126

Troubleshooting When Using the DDST Unit

Scanner is not

available on the

specified device.

The TWAIN scanner function
cannot be used on this machine.

Contact your service repre-
sentative.

Scanner is not

available. Check the

scanner connection

status.

• The machine's main power

switch is off.

• The machine is not connect-

ed to the network correctly.

• Set the main power switch

to “On”.

• Check whether the ma-

chine is connected to the
network correctly.

No response from the

scanner.

The machine is not connected
to the network correctly.

Check whether the machine is con-
nected to the network correctly.

No response from the

scanner.

The network is crowded.

Wait for a while, and then try
to reconnect.

Error has occurred

in the scanner.

The application-specified scan
conditions have exceeded the
setting range of the machine.

Check whether the scanning
settings made with the appli-
cation exceed the setting
range of the machine.

Fatal error has oc-

curred in the scan-

ner.

An unrecoverable error has
occurred on the machine.

Contact your service repre-
sentative.

Scanner is not

ready. Check the

scanner and the op-

tions.

The ARDF cover is open.

Check whether the ARDF cov-
er is closed.

Insufficient memory.

Reduce the scanning

area.

Scanner memory is insufficient. • Reset the scan size.

• Lower the resolution.

• Set with no compression.

See TWAIN Driver help.

The problem may be due to
the following cause:

• “The Relationship between

the Resolution and the Scan-
ning Area” chart in Help for
halftone scanning might not
always apply. Scanning can-
not be performed if large
values are set for brightness
when using halftone or high
resolution.

Cannot find "xxx"

scanner used for the

previous scan. "YYY"

will be used in-

stead.

(XXX and YYY indicate a scan-
ner name.)

• The main power switch of

the previously used scan-
ner is not set to “On”.

• The machine is not connect-

ed to the network correctly.

• Check whether the main

power switch of the scan-
ner used for the previous
scan is turned on.

• Check the previously used

scanner is connected to the
network correctly.

Message

Cause

Solution

Summary of Contents for Aficio IS 2325































































































































Search results

Summary of Contents for Aficio IS 2325

Reviews:

Related manuals for Aficio IS 2325

Brands by name

Popular brands

Ricoh Aficio IS 2325, Operating & Troubleshooting Instructions

Search results

Summary of Contents for Aficio IS 2325

Reviews:

Related manuals for Aficio IS 2325

Brands by name

Popular brands