Ricoh Aficio A080, Operating Instructions Manual

Page: 111 / 160

99
6. Troubleshooting
If Your Machine Does Not Operate As You
Want
The following chart gives explanations of common problems and messages. If
other messages appear, follow the instructions displayed.
Note
❒
If you cannot make copies as you want because of paper type, paper size, or
paper capacity problems, use recommended paper. See p.135 “Copy Paper”.
General
Problem Causes Solutions
“ Please wait. ” appears. This message appears
when you turn on the oper-
ation switch.
Wait for the machine to get ready.
This message appears
when you change the toner
cartridge.
The display is off. The screen contrast knob is
turned to the dark position. Set the screen contrast knob to the
light position so that the display
panel can be seen properly.
The machine is in Energy
Saver mode. Press the
{{{{
Energy Saver
}}}}
key to can-
cel Energy Saver mode.
The operation switch is
turned off. Turn on the operation switch.
Nothing happens when the
operation switch is turned
on. The main power switch is
turned off. Turn on the main power switch.
The main power indicator
continues blinking and
does not turn off when
pressed. This occurs in the follow-
ing cases:
• The machine is commu-
nicating with external
equipment.
• The hard disk is active.
When you turn the main power off,
check if the machine is not commu-
nicating with a computer.
Memory is full. The number of scanned
pages exceeds the capacity
of the hard disk. Follow the instructions displayed
on the control panel.
The function status indica-
tor is red. The function associated
with the red indicator is in-
terrupted. Press the function key correspond-
ing to the indicator. Follow the in-
structions that appear on the control
panel.
DolphinC2_GBzen_F_pre_FM.book Page 99 Wednesday, February 2, 2005 11:44 AM