Ricoh Aficio 2075 Operating Instructions Manual Download Page 40

Page: 40 / 130

Sending Scan Files by Scan to Folder

Sending Scan Files by Scan to Folder

Procedure for Sending by
Scan to Folder

A scan file is sent after scan settings
and destinations are specified.

AAAA

Press the

{{{{

Scanner

}}}}

key.

Note

❒

The illustration is an example.
The actual appearance may be
different.

BBBB

Make sure that no previous set-
tings remain.

Note

❒

If a previous setting remains,
press the

{{{{

Clear Modes

}}}}

key.

CCCC

Place originals.

Reference

The procedure for placing origi-
nals is the same as that for plac-
ing originals for copying. For
details about placing originals,
see “Placing Originals”,

Copy

Reference

DDDD

Make settings for original orien-
tation, the sides scanned, and oth-
er settings if necessary.

Reference

p.73 “Making the Settings Relat-
ed to the Orientation of the
Original and Scanned Sides”

EEEE

Make the scan settings.

Reference

There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for

scanning. For details, see
p.71 “Specifying Scan Set-
tings”.

• Recall registered settings. For

details, see p.79 “Programs”.

FFFF

If the network delivery scanner
screen appears, switch to the Scan
to Folder screen.

Press

[

]

Press

[

Switch Destination List

]

Press

[

E-mail

]

Press

[

Exit

]

The e-mail screen appears.

Press

[

]

The Scan to Folder screen ap-
pears.

GGGG

Specify the destination folder.

You can specify the destination
folder in the following ways:
• Select it from the destination list.
• Specify its registration number.

ZZZ607S

Summary of Contents for Aficio 2075



































































































































Search results

Summary of Contents for Aficio 2075

Reviews:

Brands by name

Popular brands

Ricoh Aficio 2075, Operating Instructions Manual

Search results

Summary of Contents for Aficio 2075

Reviews:

Brands by name

Popular brands