manualshive.com logo in svg

Ricoh Aficio 2075, Operating Instructions Manual

Share
Download
Ricoh Aficio 2075 Operating Instructions Manual Download Page 101

When a Message Is Displayed

93

8

[

Scanner is in use for other function. Please wait.

]

A function of the machine other than the 
scanner function is being used such as the 
copier function. Wait for a while and re-
connect.

[

Scanner is not available. Check  the scanner connection 

status.

]

• Check whether the main power 

switch of the machine is turned off.

• Check whether the machine is con-

nected to the network correctly.

• Deselect the personal firewall func-

tion of the client computer.

[

Scanner is not available on the specified device.

]

The TWAIN scanner function cannot be 
used on this machine. Contact your serv-
ice representative.

[

Scanner is not ready. Check the scanner and the op-

tions.

]

Check whether the ADF cover is closed.

[

The name is already in use. Check the registered names.

]

You tried to register a name that is al-
ready in use. Use another name.

Message

Causes and solutions

Summary of Contents for Aficio 2075



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands