manualshive.com logo in svg

Ricoh Aficio 2075, Operating Instructions Manual

Share
Download
Ricoh Aficio 2075 Operating Instructions Manual Download Page 125

Information about Installed Software

117

10

Information about Installed Software

Samba(Ver 2.2.2-ja-1.1)

For SMB transmission, this machine uses Samba ver 2.2.2-ja-1.1 (hereinafter re-
ferred to as Samba 2.2.2-ja-1.1).
Copyright © Andrew Tridgell 1994-1998
This program is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILI-
TY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave,
Cambridge, MA 02139, USA

Note

❒

The source code for SMB transmission by this machine can be downloaded
from the following website:

http://support-download.com/services/scbs

Summary of Contents for Aficio 2075



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands