manualshive.com logo in svg

Ricoh Aficio 2075, Operating Instructions Manual

Share
Download
Ricoh Aficio 2075 Operating Instructions Manual Download Page 2

Introduction

This manual describes detailed instructions on the operation and notes about the use of this machine.
To get maximum versatility from this machine, all operators are requested to read this manual carefully
and follow the instructions. Please keep this manual in a handy place near the machine.

Two kinds of size notation are employed in this manual. With this machine refer to the inch version.

Important

Contents of this manual are subject to change without prior notice. In no event will the company be li-
able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper-
ating the machine.

Do not make copies of any item for which copying is prohibited by law.

Copying the following items is normally prohibited by local law:

Bank bills, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.

Trademarks

•

Adobe

®

, PostScript

®

, and Acrobat

®

 are trademarks of Adobe Systems Incorporated.

•

Pentium

®

 is a registered trademark of Intel Corporation.

•

Microsoft

®

, Windows

®

, and Windows NT

®

 are registered trademarks of Microsoft Corporation.

•

Other product names used herein are for identification purposes only and might be trademarks of
their respective companies. We disclaim any and all rights in those marks.

•

The product name of Windows

®

 95 is Microsoft

®

 Windows

®

 95.

•

The product name of Windows

®

 98 is Microsoft

®

 Windows

®

 98.

•

The product name of Windows

®

 Me is Microsoft

®

 Windows

®

 Millennium Edition (Windows Me).

•

The product names of Windows

®

 2000 are as follows:

Microsoft

®

 Windows

®

 2000 Professional

Microsoft

®

 Windows

®

 2000 Server

Microsoft

®

 Windows

®

 2000 Advanced Server

•

The product names of Windows

®

 XP are as follows:

Microsoft

®

 Windows

®

 XP Home Edition

Microsoft

®

 Windows

®

 XP Professional

•

The product names of Windows Server

TM

 2003 are as follows:

Microsoft

®

 Windows Server

TM

 2003 Standard Edition

Microsoft

®

 Windows Server

TM

 2003 Enterprise Edition

Microsoft

®

 Windows Server

TM

 2003 Web Edition

•

The product names of Windows NT

®

 4.0 are as follows:

Microsoft

®

 Windows NT

®

 Workstation 4.0

Microsoft

®

 Windows NT

®

 Server 4.0

Summary of Contents for Aficio 2075



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands