Ricoh Aficio 180 Copy Reference Manual Download

Page: 88 / 116

What to do If Something Goes Wrong

Changing the Paper Size

Important

❒

Make sure to select paper size with
the user tools. Otherwise, misfeeds
might occur.

Reference

For paper sizes, weight, and capac-
ity that can be set in each tray, see

⇒

P.17

“Copy Paper”

Tray 1

Make sure that the paper tray is
not being used.

Pull the paper tray, then remove
papers in it.

Note

❒

The bottom plate is down auto-
matically, if not, lower the bot-
tom plate.

❒

When the bottom plate is up,
the paper tray cannot reset.

Press the release lever and pull
the left guide up. Then put it to
the paper size you want to use.

Square the paper and set it in the
tray.

Important

❒

Do not stack paper over the lim-
it mark.

Note

❒

Shuffle the paper before setting
it in the tray.

Summary of Contents for Aficio 180





















































































































Search results

Summary of Contents for Aficio 180

Reviews:

Related manuals for Aficio 180

Brands by name

Popular brands

Ricoh Aficio 180, Copy Reference Manual

Search results

Summary of Contents for Aficio 180

Reviews:

Related manuals for Aficio 180

Brands by name

Popular brands